Ok folks, here it is. Keybinding your Teamspeak to switch you from one TiG sub channel to another. To set your own keybinds for these you need to go into:
Settings > Key Settings in Teamspeak.
Click on Add then set your combination of keys then select and modify the action to be taken. Be sure you dont set the keys to comething you use ingame as it may cause confusion. You will need to set about 4 or 5 key binds. One for each channel then the overall TiG channel.
An example for you to take a look at is my setup
(See picture below). I use the NUM DECIMAL + NUMX for each channel, Num 0 for overall, 1 for Delta etc.
If you wish to use the same Keybinds as I do download
this keybinds file. Open up TeamSpeak then go into the:
Settings > Key Settings. Click on
Import then locate the
keybinds.kbn file on your hard drive and load it up. You will then see the same keybinds as above.
*
Winters
